- Catalog Home
- Performance, Engine & Drivetrain
- Transmission and Transaxle - Automatic
- Auto Trans Shift Kit
Auto Trans Shift Kit
- Installation kit for Hurst Pro-Matic
- Includes Brackets/Levers/Hardware
- Cable Sold Separately
- Multiple Transmissions Supported
- 1 Year Limited Warranty
- 25 Percent To 115 Percent More Theoretical Holding Power
- Delivers Up to 275psi Line Pressure At WOT
- Only Active When Boost Is Over 15psi
- No Transmission Relearn Required
- Installs In Under An Hour
- Lights Up Whenever The PCS Solenoid Is Being Controlled
- Will Not Conflict With Existing Transmission Tuning
- Delivers up To 320psi Of Apply Pressure
- 79 Increase In Holding Power
- Prevents Clutch Slippage
- Prevents Shift Flare
- Increased Durability Due To Higher Clutch Holding Capacity
- Fast And Simple Installation
- No Tuning Required
- 12 Months Or 24000 Mile Parts Warranty
- Prevents Mid-Range Convertor Shutter And Clutch/Band Slippage
- Reduces Shift Flare And Gear Hunting
- Increases Mid-Range Transmission Line Pressure
- Plugs Into Ttva Motor For Quick Install
- Push Button Control
- 3 Different Levels
- Easily Plugs In-Line With Factory Sealed Connectors
- Excellent For Vehicles With Carb Approved Performance Modules
- 56 Percent More Theoretical Holding Power
- Valve Body Separator Plate Stops Internal Cross Leaks
- Pressure Control Module Delivers Up To 250 PSI Clutch Apply Press
- Dynamically Adjusts Hyd. Apply Pressure Based On Turbo Boost/Load
- Dynamic Control Ramps Up The Much Larger Sweep
- Prevent Clutch Slippage
- Installation Takes 2-3 Hours
- No Full Trans. Relearn Required - Quick Relearn Suggested
- A Fresh Stock Trans. Will Have Ability To Handle Up To 400-450 HP
- 12 Months or 24000 Mile Warranty
- Eliminates Shift Overlap
- Eliminates Soft/Sluggish Shift
- On Any Stock Automatic Transmission
- Provides Crisp Shifts
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
- Requires Removal Of Trans For Installation of Internal Parts
- Incl. Our Smart Trim/Clutch Control Valve Assemblies
- Addresses Going To Neutral Under Loads
- 3/4 Slip
- Burned C2 Or C3 Clutches
- Sticks In One Gear
- Wont Move After Extended Parking
- Short Crisp Smooth Upshifts And Kickdowns
- Handles 500 Street Horsepower
- Refer To Manufacturers Warranty
- Installs In Minutes
- Reduces Slippage and Heat
- 50 State Emissions Legal
- Recalibrates Hydraulic System
- Recalibrates Electronically
- Fun and Pleasurable Drive
- Extends Transmission Life
- Simple Flip Of Switch
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
- Doubles Low Clutch Holding Pressure in 1 For Downhill Use
- Lower EGTs
- Handles Exhaust Brake
- Adjusts Shift Firmness
- More Cooling And Lubrication
- Better Converter Feed And Capacity
- Requires Removal Of Trans For Installation of Internal Parts
- Experienced Technician Installation Recommended
- 12 Month Or 12000 Mile Warranty