- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Front
Bumper- Front
- Ultra Light Weight Hybrid Bumper w/Tube And Plate Steel
- Sleek Aerodynamic Design
- Provides Optimal Tire Clearance
- Retains Factory Skid Plate
- Retains Adaptive Cruise Control And Park Assist
- Center Cutout For Rigid Industries 20 in. LED Light Bar
- The Fit Of The Bumper Is High And Tight
- Perfectly Follows The Vehicles Body Lines
- Apollo Front Bumper
- Full Replacement Bumper With Full Grill Guard
- Gloss Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- MADE IN THE USA
- Full Replacement Bumper With Full Grill Guard
- Gloss Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- MADE IN THE USA
- Full Replacement Bumper With Full Grill Guard
- Gloss Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- MADE IN THE USA
- Full Replacement Bumper With Full Grill Guard
- Gloss Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- Optional Bolt-on 2in. Receiver
- MADE IN THE USA
- High Clearance Design Tucks Up Tight To Provide Extreme Approach Angle And Clearance On Tight Trails
- Stubby Width Gives Tires Full Access To Grip The Terrain And Pull The Jeep Up And Over Obstacles
- Recessed Winch Mount With Integrated Fairlead Plate Provides A Low Center Of Gravity And Unrestricted Airflow
- Fits Up To 12000Lb Winch
- Beefy Top-Mounted Recovery Tabs Stay Out Of The Way When Wheeling But Ready To Use When Needed
- 4 mm Thick Steel Plate Construction CNC Laser Cut And Precision Brake-Formed
- Specific Design To Complement Vehicle
- Durable Steel Construction For Maximum Protection
- Superbly Engineered/Airbag Compatible Mounting System
- Equally Suited For Winch And Non Winch Applications
- Separate Winch Cover Panel Available
- Provision To Accommodate A Range Of IPF And ARB Driving Lights
- Retains OE Fog Lights
- Tow Points Allow For Excellent Approach Angle
- Wing Design Allows For A 37 In. Tire To Be Fitted
- Wings Designed To Suit Oe Flares Of Models
- Durable Urethane Buffers
- Classic Bumper Design Offer A Modern Twist To A Classic Design
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Comes In Satin Black Finish Black Finish
- Manufactured From Durable 5/32 Steel And 2 3/8X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- High Strength D-Ring Mounts Welded Both Inside And Out
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Double Steel Construction For Maximum Protection
- Optimum Strength And Approach Angle
- Cover Straps Attached To The Uprights
- No Exposed Edges
- Accommodates A Range Of IPF/ARB Driving Lights
- Hard Wearing Satin Black Powder Coat
- Full Replacement Bumper With Full Grill Guard
- Flat Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- Optional Bolt-on 2in. Receiver
- MADE IN THE USA
- ELITE Front Guard Plate
- Full Replacement Bumper w/Full Grill Guard
- Flat Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-On 1 in. D-Ring Mounts
- Optional Bolt-On 2 in. Receiver
- MADE IN THE USA
- FMJ Full Width Winch Bumper
- FMJ Stubby Winch Bumper
- For Toyota Kakadu
- Stubby Winch Bumper
- Front Bumper
- Highest Quality Tubular Program On The Market
- Welded One Piece Design For Extreme Durability
- Welded To Exact Specifications
- Four Different Finishes
- Pre-Cut Vertical Uprights
- Makes Your Vehicle Look Great
- Mounting Hardware Included
- Cold Rolled Sheet Steel
- 250 Heavy Grade Wall Tubing
- Cold Rolled Sheet Steel
- 250 Heavy Grade Wall Tubing
- Manufactured From Durable 5/32 Steel
- Protects Vehicle From On And Off-Road Debris
- High Strength D-Ring Mounts Welded Both Inside And Out
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Led Lights Included
- Comes In Satin Black Finish
- Air Bag Compatible Mounting System
- Automotive Grade Polyurethane Buffers
- Recessed Roller Fairlead Provision
- Vehicle-Specific Design Suits The Jeep Wrangler Jl And Gladiator Jt Fitted w/Front Parking Sensors
- Provision To Accommodate ARB Intensity Leds And A Range Of Bushranger And IPF Lights
- Wing Design Allows For A 37 Tire To Be Fitted [Suitable Suspension Lift And Rim Off Set Required]
- Zinc Rich Primer For Additional Corrosion Resistance
- Durable Steel Construction For Maximum Protection
- Equally Suited For Winch Or Non-Winch Applications
- Engineered Air Bag Compatible Mounting System Secures To The Chassis Via High Tensile Bolts And Arb Impact Absorbers
- Press-Formed Apertures In The Bumper For Fitment Of Oe Led Fog Lights
- Twin Jack Points Located In Center Pan To Suit Arb Jack And Mechanical Jacks
- Durable Urethane Buffers
- Two Aerial Brackets Located On The Top Of The Center Pan
- Accommodates Warn/Magnum/Bushranger/Smittybilt Low Mount Model Electric Winches Up To 10000Lb
- Front Winch Bumper
- Full Width Bumper
- Provides Greater Tire Clearance
- Winch Ready-Accepts Warn Zeon Winches
- Integrated D-Ring Mounts That Hold Up To 7/8 Shackle
- Side Vents And Large Mesh Insert For Optimal Air Flow
- Accommodates Most 20 Light Bar With Optional Insert
- Front Bumper
- Stubby Bumper
- Provides Maximum Tire Clearance
- Winch Ready-Accepts Warn Zeon Winches
- Integrated D-Ring Mounts That Hold Up To 7/8 Shackle
- Side Vents And Large Mesh Insert For Optimal Air Flow
- Accommodates Most 20 Light Bar With Optional Insert
- Provides Greater Tire Clearance
- Fully Customizable w/A 14 Piece Modular Design
- Strategically Placed Cutouts For Maximum Airflow
- Mounting Options For 2x2 in. Dually Lights To Max. Light Coverage
- Engineered To Work With Up To A 12000 lbs. Warn Zeon Winch
- 3/16 in. Steel Winch Tray
- MADE IN THE USA
- Revolutionary Combination Of Both Grille And Winch Bumper
- Provides Greater Tire Clearance
- Strategically Placed Cutouts For Maximum Airflow
- Engineered To Work With Up To A 12000 Lbs Warn Zeon Winch
- Complete Bolt On Installation w/Stainless Steel Hardware
- MADE IN THE USA
- Aggressive Design And Unique Styling
- Combines Both Grill And Bumper
- Side Mounting Slots And Tabs For Light Options
- Lower Cutout For Increased Airflow
- Provides Far More Tire Clearance
- Removable Insert For Customization Options
- Aggressive Design
- Guardian Front Bumper
- Bumper Is Designed Ultra Narrow
- Provide Maximum Tire Clearance
- Tapered Knife Edge Design
- Welded Inside And Out For Superior Strength
- Winch Ready Including WARN Power Plant
- Black Powder Coat
- Manufactured From High Quality Cold Roll Steel
- Precision Laser Cut
- CNC Press Brake Formed
- Works With Most Winches On The Market
- Includes .75 in. Steel Shackles With Black Isolators
- Includes LED Cube Lights
- Light Bars Sold Separately
- Protects Vehicle From Damage Against Wildlife And Road Debris
- Provides Added Safety To Driver And Vehicle
- Heavy Duty Diamond Plate Steel
- Honeycomb Mesh Protects Grille/Gives Maximum Airflow
- 1.5 in. Headlight Protection Tubes
- 2 in. Full Wraparound Wings Ties Into Bumper
- Provisions For Factory Parking Sensors
- 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
- Compatible For Factory Fog Lamps Or LED Post Mount Lights
- Custom Die Cast Riveted Logo Badge
- Mounting Provisions For License Plate
- Hardware Mounting Brackets Included
- Made Of 7 Gauge Steel
- 1-Piece Welded Construction
- Fits Medium Frame 8000-12000 lbs. Winches [Up To 9.75 in. Tall]
- Fits Remote Solenoid Box Winches Only
- Pre-Drilled For Winch And Fairlead Mounting
- Laser-Cut Openings To Allow Engine Cooling
- Built To Receive [2] 10 in. Led Light Bars
- Optional Light Bar And Pre-Runner Bar Sold Separately
- 1 in. Thick HD Shackle Mounts
- Adj. Mounting Brackets Accommodate Led Lights 11-12.75 in. Long
- Application Specific Designs
- Available In Textured Black Finish Or Raw
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Includes High Powered Led
- Fairlead Attachment Plate Accommodates Most Standard-Sized
- 3/16 in. Laser Cut Steel With E-Coat/Wrinkle Finish Powder Coat
- Developed Specifically For The Hard Core Rock Crawler
- Sturdy Winch Plate Is Incl. Accommodate Most Standard-Sized
- Bolt-On/No-Drill Installation To Factory Mounting Locations
- Accessories Shown Are Not Included
- Modular Front Bumper Specifically Designed
- Design Let You Build Up The Front Bumper As Desired w/Accessories
- High-Access Shape Of The Bumper Allows More Clearance Over Rocks
- 3/16 in. Thick Steel To Withstand Tough Off-Road Trails
- Bolt-On Installation To Factory Bumper Mounting Locations
- No Drilling Required
- Incl. Fully-Welded D-Ring Shackle Mounts w/1 in. Inside Diameter
- Compatible w/Factory Fog Lights/Incl. Wiring Connector Extension
- Accessories Not Included
- Tough As Nails/Tested For Durability And Strength
- Manufactured From Durable 5/32 Steel
- Protects Vehicle From On And Off-Road Debris
- High Strength D-Ring Mounts Welded Both Inside And Out
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Includes High Powered Led
- Winch Ready
- Integrated D-Ring Mounts And Tow Hooks
- Fab Fours Signature Injection Molded Light Housings
- 90mm Fog And 60mm Turn Indicator Lights Are Included
- Winch Delete Tray Included
- Enhances the look while remaining lightweight
- 1in. D-Ring Mounts
- HELLA 90mm Fogs And 60mm Turns Included
- Signature Light Housings
- 9.5 Winch Ready
- Mounting Brackets And Hardware Included
- Lifetime Warranty On Structure
- 1 3/4in. OD Tube Grill Guard
- Made From 3/16 Cold Rolled Steel
- Ultra Bright Driving And Fog Lights
- Winch Mounting System Holds Up To 16500 Lbs Winch
- Solid Mount D-Rings
- One-Piece Welded Design
- Five Year Limited Warranty
- M1A2 Front Bumper
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Aggressive Chiseled Design
- Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
- Pre-Drilled For Winch And Fairlead Mounting
- Fits Most Flush Mount Auxiliary Lights
- 1 in. Thick HD Shackle Mounts
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Aggressive Chiseled Design
- Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
- Pre-Drilled For Winch And Fairlead Mounting
- Fits Most Flush Mount Auxiliary Lights
- 1 in. Thick HD Shackle Mounts
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Aggressive Chiseled Design
- Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
- Pre-Drilled For Winch And Fairlead Mounting
- Fits Most Flush Mount Auxiliary Lights
- 1 in. Thick HD Shackle Mounts
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- 1 Year Finish Warranty
- Limited Lifetime Workmanship Warranty
- Winch Ready-Accepts Up To 12000 lbs. Warn Zeon Winch
- 3/16 in. Steel Construction
- 140 lbs.
- Mounting Options For 2x2 in. Cube Lights To Maximum Led Coverage
- Front Bumper w/Provided Brackets That Tie Directly To The Frame
- MADE IN THE USA
- Made In the USA
- Lights Sold Separately
- Create Your Look
- Replaces Factory Bumper
- No Cutting Or Drilling Required
- Bolts Directly To Factory Bumper Mount
- Standard Color Is Gloss Black Powdercoat
- Lifetime Warranty On Product/5-Year Warranty On Finish
- Full Length Multi-Mount System
- Allows For Installation Of Multiple Combinations Of LED Lights
- May Be Protected By US Patent/International Copy Right Laws
- Vehicle-Specific Design Suits Ford Bronco Wide Fender Flares
- Durable Steel Construction For Maximum Protection
- Pre-Assembled w/Fog Housing And Integrated LED Light Bar
- Twin Jack Points Located In Center Pan
- Twin-Forged Chassis-Mounted ARB Rated 8T Recovery Points
- Wing Design Allows For A 37 in. Tire
- Zinc Rich Primer For Additional Corrosion Resistance
- Finished In Integrit Black Textured Powder Coat
- Press Formed Apertures In Bumper For Fitment Of Fog Light
- 3mm Laser Cut And Press Formed Center Panel
- w/NP Provision In Vintage Silver
- Off-Road Front Bumper
- Open Fender Front Bumper
- Mount Kit Included
- 2 In. Diameter Tube Frame With 1.5 In. Diameter Center Tubes
- Integrated Mount For Two Single Or One Double Row 30 In. LED Bar
- Equipped With Mount Points For Optional Auxiliary Lighting
- Optional Outlaw Skid Plate Available. Sold Separately
- Optional Outlaw Led Light Kits Available. Sold Separately
- Round Led Light Kit w/Westin Auxiliary Lights Sold Separately
- Square Led Light Kit w/Hyper Auxiliary Lights Sold Separately
- Black Powder Coated
- 1/4in. And 3/16in. Steel Construction
- Winch Mount For The WARN 16.5 Or Smaller
- 1in. D-Ring Mounts
- Mounting Brackets And Hardware Included
- HELLA 90mm Fog Lights And 60mm Turns Included
- Fully Welded Inside And Out
- Lifetime Warranty On Structure
- 1/4in. And 3/16in. Steel Construction
- Winch Mount For The WARN 16.5 Or Smaller
- 1in. D-Ring Mounts
- Mounting Brackets And Hardware Included
- Fab Four 90mm Fog Lights And 60mm Turns Included
- Fully Welded Inside And Out
- Lifetime Warranty On Structure
- Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength
- Increases Ground Clearance And Angle Of Approach
- Constructed Of 10 Gauge Steel For Strength And Style
- Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area
- Has Provisions For Factory Sensors - On Some Applications
- 10 Gauge Steel Valance Included - On Some Applications
- Valance Features Laser-Cut Westin Logo
- Bolt On Skid Plate Available - Sold Separately
- Compatible For Factory Tow Hooks - On Some Applications
- Outrigger Brackets Support Wings Of Bumper For Maximum Strength
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Low Profile Design
- The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models
- Accommodates Recessed Hawse Fairlead For Maximize Approach Angle
- Constructed Of 10 Gauge Steel For Strength And Style
- Heavy-Duty 4 Gauge Winch Mount Center Section
- Features Large Winch Access Holes For Easier Operation
- Provides Two Recovery Points For Shackles
- Configured To Accept Most Single Row 20 in. Led Light Bars
- Available In Two Bull Bar Styles/Round And Angular
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Available In Textured Black Finish
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- Fits Oe Fog Light Housing
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Manufactured From Durable 5/32 Steel/2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Includes High Powered Led
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Manufactured From Cold Formed Steel
- Come In Charcoal Gray Finish
- Easy Installation
- Aggressive Design
- Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
- Perfectly Follows The Body Lines
- Side Mounting Slots And Tabs For Various Light Options
- Provides Far More Tire Clearance
- Integrated Shackle Mounts
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- No Receiver
- With D-Ring Mounts
- Classic Bumper Design Offer A Modern Twist To A Classic Design
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Comes In Satin Black Finish Black Finish
- Rock Stubby Front Bumper
- Free Shipping-Some Restrictions May Apply
- International Shipments Will Incur Additional Costs
- .095 Wall Tubing
- Made In the USA/1 pc. Non Modular Design
- Lights Sold Separately
- No Cutting Or Drilling Required
- All Bolt On Design That Will Not Flex
- Standard Color Is Gloss Black Powdercoat
- Mounts 2 Rigid Custom Made 38 in. LED Light Bars
- Lifetime Warranty Product/5-Year Warranty On Finish
- R.S.P. Full Replacement Front Bumper w/Aluminum Skid Plate
- May Be Protected By US Patent/International Copy Right Laws
- Free Shipping-Some Restrictions May Apply
- International Shipments Will Incur Additional Costs
- .095 Wall Tubing
- Made In the USA
- Lights Sold Separately
- Bolt On Attachment/No Cutting Or Drilling Required
- Mount Up To Four 9 in. Lights
- Standard Color Is Gloss Black Powdercoat
- Lifetime Warranty On Product/5-Year Warranty On Finish
- R.S.P. Full Replacement Front Bumper w/Aluminum Skid Plate
- Welded 1pc. Construction For Strength/Longevity
- May Be Protected By US Patent/International Copy Right Laws
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Fits Oe Fog Light Housing
- Durable Steel Construction
- Multi Fold Upswept And Tapered Wing Design
- Optimum Strength And Approach Angle
- Split Pan Design For Max Strength And Airflow
- Superbly Engineered And Air Bag Compatible
- Suited To Winch And Non-Winch Applications
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Fits Most Medium Frame 8000-12000 lbs.
- Mounting Brackets Mount Directly To Frame
- Available In Textured Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Fits Most Medium Frame 8000-12000 lbs.
- Mounting Brackets Mount Directly To Frame
- Available In Textured Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Fits Most Medium Frame 8000-12000 lbs.
- Mounting Brackets Mount Directly To Frame
- Available In Textured Black Finish
- Unique Triangulation Anchor Fasten
- To Frame In Multiple Locations
- Integrated Gen2 Light Mounting Tabs On The Bull Bar
- Removeable bull bar 1.75 in .120 Wall Overrider And Kickers
- Raised Corners For Better Entry
- And Exit Under The Most Extreme Conditions
- Zinc Undercoated Dual Stage Textured For Long Life
- Heavy Duty .25 in. Steel Plate Design
- Rugged One Piece Design For Extra Strength
- Sloping Ends For Greater Tire Travel
- Four Light Tabs To Mount Off Road Lighting
- 0.25 in. Thick Custom Mounting Brackets
- Welded D-Ring Tab
- Has A Wide Opening To Install Winch
- Protects Your Front End From Large Rocks
- D Ring And Jack Point Mount
- Welded Inside And Out
- Raised Corners
- Fender To Fender Protection
- Stinger Front Bumper
- 3mm Deep Drawn Formed Steel
- Winch Compatible Up To 12K
- Includes Modular Wings w/Light Provisions
- Integrated D-Ring and Lift Points
- OE Fog Light Provisions
- Integrated Overrider w/13 in. Lightbar Provision
- Specific Design To Complement Vehicle
- Durable Steel Construction For Maximum Protection
- Manufactured From 4 mm Laser Cut And Folded Steel Sheet
- Equally Suited To Winch And Non Winch Applications
- Provision To Accommodate A Range Of IPF And ARB Driving Lights
- 0.8 in. 350 Grade Steel Recovery Points
- All Hardware Zinc Plated For Corrosion Resistance
- All Exterior Surfaces Are CMT Pulse Welded
- ERW center frame tube
- Winch Ready
- Integrated D-Rings And Tow Hooks
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Fits Oe Fog Light Housing
- Manufactured From Durable 5/32 Steel And 2X.120 Tubing
- D-Ring Mounts Welded Inside And Out For Increased Strength
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Fits Oe Fog Light Housing
- Air Bag Compatible
- 30mm Radius on Wings And Center
- Incl. LED Indicator And Clearance Light
- Will Accommodate Warn/Magnum/Smittybilt Low Mount Winches
- Durable Two-Piece Buffers
- Vehicle Specific Design
- Twin Hi-Lift Jack Points
- Two Aerial Brackets
- Will Accommodate Intensity LEDs And IPF Lights
- Zinc Rich Primer For Corrosion Resistance
- Stubby Design For Maximum Tire Clearance
- Winch Ready
- Integrated Shackle Mounts
- Integrated 10 in. Dual Row Light Bar Mount
- Simple And Quick Installation
- Includes Scorpion 20 in. LED Single Row Light Bar
- Black Powder Coat
- Integrated .75 in. Thick Winch Plate
- Slim Sleek Design That Molds To The Factory Bumper
- Steel Construction
- Works With Most Winches On The Market
- Functional Design
- Works With 2 in. Receiver Tow Hitch
- Contoured Corners
- Allows Clearance For Spare Tire
- Black Powdercoat Finish
- 3 Year Warranty
- Light Weight
- Steel Construction
- Integrated 20 in. Light Bar Housing
- Mounting Options For Two 2 in. LED
- Lower Cut Offs For Better Air Flow
- Fits High And Tight
- Fits All Models Of Jeep Renegade
- Made In USA
- Winch Ready For The WARN Zeon 10
- Center Mount For Integrated 30 in. Light Bar
- Mounting Options On Each Side For Three 3X3 LED Cube Lights
- Integrated D-Ring Mounts Provides Far Greater Tire Clearance
- Made From 3/16 in. Steel Construction
- 2 Stage Matte Black Powder Coat With Epoxy Primer
- MADE IN THE USA
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- 3/16-Inch Plate Steel Construction
- Features Adj. Mounting Brackets And Ribs To Protect Your Lights
- Led Light Bar Mount Accommodates A 20 in. Single Row Light Bar
- Winches Fit Inside Bumper To Allow Max Air Flow To The Radiator
- Fits Westin Or Competitor Light Bars
- 2 Side And 2 Front Off-Road Jack Points
- Corner Auxiliary Light Mount Points And Rock Light Mount Points
- Pre-Drilled Holes To Allow Install Of A Winch w/Bumper Installed
- Recovery Shackle Mounting Point Allows Easy Tow Strap Attachment
- Recommended Optional Skid Plate And Light Sold Separately
- No Drilling Required - Bolt On Installation
- Includes Bumper; Mounting Hardware And Install Instructions
- Made From 3-16 Cold Rolled Steel
- Welds On Inside And Out
- Marine Grade Steel Hardware
- Textured Matte Black Finish
- 5 Year Limited Warranty
- Unique Design With Angles And Raised Corners
- No Modifications Required
- Winch Mounting Capability
- XRC Front Bumper
- D Ring And Jack Point Mount
- Welded Inside And Out
- Raised Corners
- Fender To Fender Protection
- Made From 3/16 Cold Rolled Steel
- Solid Mount D-Rings
- Built In Winch Plate Up To 15k Winch
- Towable D-Ring Mounts
- Five Year Limited Warranty