- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Rear
Bumper- Rear
- 11-Gauge US Steel Construction
- Retain OEM Receiver Hitch And Wiring
- Pre-Cut Openings To Utilize Factory Sensors
- 100 Pct. Made In The USA
- Apollo Rear Bumper
- Integrates The Existing Receiver Hitch
- Back Up Lights
- Back Up Sensor Holes
- Retains Receiver Hitch And Wiring Locations
- Pipe And Formed Treadplate
- Gloss Black Powder Coat
- Combination Pipe And Tread Plate Construction
- Gloss Black Powder Coat
- Back Up Lights Included
- Pre-Drilled Sensor Holes
- Retains OEM Receiver Hitch And Wiring Locations
- MADE IN THE USA
- High Clearance Design Tucks Up Tight To Provide Extreme Approach Angle And Clearance On Tight Trails
- Wraps Around To Protect Corners Of The Jeep Body
- Faceted Ends For High Clearance At The Corners Of The Jeep
- 4 mm Thick Steel Plate Construction CNC Laser Cut And Precision Brake-Formed
- Multi-Stage Fine-Texture Black Powder Coat Finish For Long Lasting Great Looks And Corrosion Resistance
- Backed By Paramounts Lifetime Structural Warranty And 5-Year Finish Warranty
- Manufactured From Durable 5/32 Steel
- Protects Vehicle From On And Off-Road Debris
- High Strength D-Ring Mounts Welded Both Inside And Out
- D-Rings Included - 4.75 Ton Capacity
- Includes 2 Receiver
- Comes In Satin Black Finish Black Finish
- Mount Kit Sold Separately
- Popular Diamond Tread Design
- Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
- Downsize and Compact Are 350/3500 lb. Weights
- V5 Tested Certified To SAE J684
- Flat Black Powder Coat
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Paintable
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Rear Bumper
- Black Powder Coat
- Manufactured From High Quality Cold Roll Steel
- Precision Laser Cut
- CNC Press Brake Formed
- Works With Most Winches On The Market
- Includes .75 in. Steel Shackles With Black Isolators
- Includes LED Cube Lights
- Protects Vehicle From Damage Against Wildlife And Road Debris
- Provides Added Safety To Driver And Vehicle
- Heavy Duty Diamond Plate Steel
- Honeycomb Mesh Protects Grille/Gives Maximum Airflow
- 1.5 in. Headlight Protection Tubes
- 2 in. Full Wraparound Wings Ties Into Bumper
- Provisions For Factory Parking Sensors
- 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
- Compatible For Factory Fog Lamps Or LED Post Mount Lights
- Custom Die Cast Riveted Logo Badge
- Mounting Provisions For License Plate
- Hardware Mounting Brackets Included
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- 1 in. Thick HS Shackle Mounts
- Two Flush Mount Led Lights Included
- License Plate Illumination Lights Included
- Laser-Cut HDX Logo On Ends
- Application Specific Designs
- Mounting Brackets Included
- Available With Or Without Provision For Back-Up Sensors
- Available In Textured Black Finish Or Raw
- Integrated Steps On Either Side Of The Tailgate
- Durable Formed 3/16in. Steel Construction
- Retain OEM Receiver Hitch And Wiring Locations
- 3/4in. D-Ring Recovery Points
- 2 Stage Black Powder Coat
- Manufactured From Durable 5/32 Steel
- Protects Vehicle From On And Off-Road Debris
- High Strength D-Ring Mounts Welded Both Inside And Out
- D-Rings Included - 4.75 Ton Capacity
- Includes 2 Receiver
- Comes In Satin Black Finish Black Finish
- Modular Rear Bumper Specifically Designed
- Heavy-Duty Tire Carrier And Departure Roller Kit
- With Optional Accessories Like End Caps
- Modular Design Lets You Build Up The Rear Bumper As Desired
- High-Access Profile Allows More Clearance Over Rocks
- 3/16 in. Thick Steel To Withstand Tough Off-Road Trails
- Bolt-On Installation To Factory Bumper Mounting Locations
- No Drilling Required
- Incl. Fully-Welded D-Ring Shackle Mounts w/1 in. Inside Diameter
- Tough As Nails - Tested For Durability And Strength
- Accessories Not Included
- 3/16 in. Laser Cut Steel w/E-Coat And Wrinkle Finish Powder-Coat
- Warning Do Not Exceed Towing Capacity
- Includes A Class 2.5 Receiver Hitch
- No-Drill Application
- w/Bolt-On Convenience To Factory Mounting Points
- D-Rings Sold Separately
- D-Ring Mounting Bosses Welded Both Front And Back For Strength
- 2 in. Hitch Mount Accessories
- Approach/Departure Roller Mounts Not Included
- Does Not Have Impact Strip Holes
- Quality Stamped For A Precise Fit And Look
- Heavy Gauge Steel For Strength
- Chrome Plated For Oe Finish And Corrosion Protection
- Includes All Factory Mounting Points For An Easy Installation
- Made From 3/16 and 1/4 in. Cold Rolled Steel
- 7/8 in. Solid D-Ring Mounts
- Requires No Drilling
- Two Stage Matte Black Powder Coat Finish
- 5 Year Limited Smittybilt Advantage Warranty
- M1A2 Rear Bumper
- Mount Kit Included
- 2 In. Diameter Tube Frame
- Optional Class III/IV Hitch Available. Sold Separately
- Retractable License Plate Holder Conceals Receiver Hitch
- Equipped With Mount Points For Optional Auxiliary Lights
- Available For Vehicles With Or Without Backup Sensors
- Bolt-On Installation; No Drilling Required
- Signature Series Step Pad
- Complete Assembly
- Molded Polymer Step Pads
- V5 certified
- Interchangeable Components
- 3 Year Warranty
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Increases Ground Clearance And Angle Of Approach
- Constructed Of 10 Gauge Steel For Strength And Style
- Compatible For Blind Spot Monitors And Parking Sensors
- Accommodate For Oem Hitch And Led Back Up Lights
- Configured To Accept 2 Fm6 Led Flush Mount
- Custom Laser-Cut Westin Logo
- Hardware And Mounting Brackets Included
- Bolt-On Installation - No Drilling Required
- Mounting Brackets Will Vary With Make/Model
- Brushed Aluminum Skid Plate Included- Works with Factory Hitch
- Fully Welded 1-piece construction- 1.75 in. .095 Wall Tubing
- Pre-Runner Style
- 5 year Finish Warranty- Lifetime Workmanship Warranty
- Manufactured From Steel For Maximum Strength
- Aggressive Styling
- Integrated Tow Hooks And D-Ring Mounts
- Double Rung Side Step
- Fab Fours Signature Knife Edge Design
- Ease Of Installation
- Includes 16 Gauge Removable Skin
- Sensor Compatible
- 2 Integrated Pod Mounts For Reverse Lights
- Stainless Steel Hardware
- 2 Stage Matte Black Powder Coat
- 11 Gauge Steel Construction
- MADE IN THE USA
- Manufactured From Durable 5/32 Steel
- Protects Vehicle From On And Off-Road Debris
- High Strength D-Ring Mounts Welded Both Inside And Out
- D-Rings Included - 4.75 Ton Capacity
- Includes 2 Receiver
- Comes In Satin Black Finish Black Finish
- Highest Quality Tubular Program On The Market
- Welded One Piece Design For Extreme Durability
- Welded To Exact Specifications
- Four Different Finishes
- Makes Your Vehicle Look Great
- Mounting Hardware Included
- Manufactured From Durable 5/32 Steel
- Protects Vehicle From On And Off-Road Debris
- High Strength D-Ring Mounts Welded Both Inside And Out
- D-Rings Included - 4.75 Ton Capacity
- Includes 2 Receiver
- Comes In Satin Black Finish Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- 1 in. Thick HD Shackle Mounts
- Two Flush Mount Led Lights Included
- Welded Hitch Receiver
- Laser-Cut Snyper Logo On Ends
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- Aggressive Design
- Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
- Perfectly Follows The Body Lines
- Side Mounting Slots And Tabs For Various Light Options
- Provides Far More Tire Clearance
- Integrated Shackle Mounts
- Rock Crawler Rear Bumper
- With Receiver
- No D-Ring Mounts
- Carbine Rear Bumper
- E Coat Undercoat Dual Stage Textured For Long Life
- Heavy Duty .25 in. Steel Plate Design
- Provides Rear End Protection
- D Ring And Jack Point Mount
- Welded Inside And Out
- Raised Corners
- 3 Point Mounting System Supports Oversized Tire
- Sloping Ends For Greater Tire Travel
- Black Powder Coat For Long Life
- 0.25 in. Thick Custom Mounting Brackets
- Heavy Duty Off Road Design Is Built To Last
- Easy Swing Out/Swing In
- Standard Rear Bumper
- 3mm Deep Drawn Formed Steel
- Winch Compatible Up To 12K
- Includes Modular Wings w/Light Provisions
- Integrated D-Ring and Lift Points
- OE Fog Light Provisions
- Integrated Overrider w/13 in. Lightbar Provision
- Durable Steel Construction
- ARB Summit Rear Step Towbar
- Cold Rolled Brite Steel
- OE Style Steel Step Plate
- Molded Polymer Surface
- Mount Kit Sold Separately
- 3 Year Warranty
- Manufactured From 5/32 in. Steel
- Protects Vehicle From On And Off-Road Debris
- High Strength D-Ring Mounts Welded Both Inside And Out
- D-Rings Included - 4.75 Ton Capacity
- Built In Winch Plate Will Mount Up To 12000Lbs Winch
- Comes In Satin Black Finish Black Finish
- Functional Design
- Works With 2 in. Receiver Tow Hitch
- Contoured Corners
- Allows Clearance For Spare Tire
- Black Powdercoat Finish
- 3 Year Warranty
- Superior Strength And Styling
- Give Your Vehicle That Extra Cool Factor
- Two Front Side Openings Allow Light Options
- Sensor Compatible
- 11 Gauge US Steel
- RotoPax Mount
- 3/16-Inch Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points
- Rock Light Mount Points
- 2 Off-Road Jack Points
- No Drilling Required - Bolt On Installation
- Includes Bumper; Mounting Hardware And Install Instructions
- X2 Rear Bumper
- Made From 3-16 Cold Rolled Steel
- Welds On Inside And Out
- Marine Grade Steel Hardware
- Textured Matte Black Finish
- 5 Year Limited Warranty
- D Ring And Jack Point Mount
- Welded Inside And Out
- Raised Corners
- Unique Design With Angles And Raised Corners
- No Modifications Required
- Winch Mounting Capability
